Customer voice · Expert interview

Premium or low-cost: how a Vietnamese steel and cement plant decides which bearing goes on the shaft

Format
Modelled interview
As of
October 2026
Market
Vietnam
Industry
Industrial components (bearings and MRO)
Length
≈ 30 min read
SKFHoa PhatVietnam Steel AssociationHanoi Market Management
Modelled interview. Built from KIRA's face-to-face interviews with purchasing managers, maintenance managers and engineers at heavy-industry plants and with bearing distributors in other Southeast Asian markets, set in today's Vietnamese market. How the trade works comes from what those people told our analysts; every figure comes from a public source, marked next to the answer.

Summary

  • In steel and cement the bearing is a risk decision, not a price decision: continuous-process plants stay loyal to a brand because downtime is costly, while seasonal plants shop on price. Vietnam sold a record 112Mt of cement in 2025 and made 24.7 million tons of crude steel, so the lines are under load. 1 2 3
  • The machine usually chooses the brand: the equipment manual specifies it, buyers write the incumbent 'or equivalent', and junior engineers stay with the premium name while senior ones are more flexible. 4 5 6
  • Low-cost bearings win in non-critical, use-and-throw positions, and a second brand is welcomed mainly to keep the leader in check on price. One vendor estimate puts China's ball-bearing supply to Vietnam at USD 140.9 million in 2024, with price competition from Chinese manufacturers listed as a market challenge. 7 8 9
  • Fakes and grey stock are a live buying risk: Hanoi market management found 29,886 bearings suspected of counterfeit SKF branding in November 2025, bought without legal invoices and offered through a social media page. 10
  • Volumes keep rising: cement output was an estimated 89.5Mt in the first nine months of 2026 and crude steel 15.18 million tons in the first half, so maintenance windows are tight and stock on the shelf matters. 11 12
  • Newcomers should start with the senior maintenance people, demonstrate service free before asking to be paid, and expect the buyer to keep the leader in check with a second brand. Export pressure on steel, with US tariffs of up to 50%, is the thing to watch. 6 13 8 14

Transcript

01A bearing is a risk decision, not a price decision

KAKIRA Analyst

You buy maintenance parts for a site that never really stops. What do outsiders get wrong about buying bearings?

EXExpert

They think we compare prices. In my plant a bearing is hardly ever a price decision, it is a risk decision. Continuous-process plants like cement stay loyal to a brand because downtime is so costly, while plants that run seasonally do shop on price in the quiet months. I am in the first group, so the question I ask is not 'what is cheapest' but 'what happens if this one fails at night'. 1

And the volumes do not forgive a stop. Vietnam sold a record 112Mt of cement in 2025, 75Mt at home and nearly 37Mt for export, so a mill or kiln that stops is a queue of trucks and ships waiting. 2 Steel is the same: crude steel reached 24.7 million tons in 2025, a five-year high, and the first half of 2026 ran at 15.18 million tons, up 26.9%. 3 12

KAKIRA Analyst

So what does a stoppage actually change in how you buy?

EXExpert

I will not give you my plant's hourly loss, that stays inside the company, and it differs a lot between a kiln drive and a rolling line. What I can tell you is the behaviour. When a bearing sits in a position that can stop the whole line, nobody on my side wants to be the person who approved a brand nobody had tried. Plants like ours simply stay with what has not failed us. 1

You see it in the people too. Junior engineers stick to the premium brand because they are afraid of making a mistake, and senior engineers, who have seen more failures and more good surprises, are more willing to try something else. So the mood in the room depends on who is in the room. 6

02Who really chooses the brand

KAKIRA Analyst

On paper procurement chooses. Who actually chooses?

EXExpert

In practice the machine chooses. The brand is whatever the equipment manual specified, and a plant with machinery from one region tends to prefer bearings from the same region. That is why a new line from a foreign supplier arrives with its bearings already decided, and the aftermarket dealer is only competing for the replacement years later. 4

The second thing is habit. From what I hear across the region, and it is true here as well, buyers write the incumbent brand 'or equivalent' on the request. Purchasing does not always coordinate with engineering, and nobody in purchasing dares to risk another brand on his own signature. The word 'equivalent' is an opening, but it is a small one. 5

KAKIRA Analyst

How often do you switch brands?

EXExpert

Rarely, and only in steps. We do not change the brand in a critical position because somebody sent a better quotation. We try the alternative somewhere harmless first and we watch it for a long time. 1 I will also admit that a second brand has a use beyond the shaft: it keeps the market leader in check when we talk about price, and that is part of my own thinking. 8

When a dealer disappoints me, I change the dealer and keep the brand. In our trade customers follow brands, not dealers. A dealer who thinks the relationship is the product is making a mistake. 15

03Premium versus low-cost: where each belongs

KAKIRA Analyst

Where does a low-cost bearing win in your plant?

EXExpert

In non-critical, use-and-throw jobs: a small conveyor, an auxiliary fan, a pump with a standby beside it. If it fails, we change it and nobody loses sleep. 7 Challenger brands also get in when the leader is out of stock or too expensive, and I do not look down on that, it is a real role. 7

The Chinese brands are the obvious low-cost group. One vendor report on Vietnam's bearing market says China supplied USD 140.9 million of ball bearings in 2024, more than 50% of ball-bearing import value, and lists intense price competition from Chinese manufacturers as a challenge. I cannot check that estimate myself, but it matches what dealers push at my desk. 9

KAKIRA Analyst

Is the premium worth paying in the critical positions?

EXExpert

In the critical ones, always, and I do not pretend there is a neat formula. The gap on the quotation looks small next to a stopped line, and the premium supplier is also the one who answers the phone when something odd happens. 1 The same report says commodity products face narrow margins. 9

From the buyer's chair that looks right: a supplier living on a narrow margin has little to protect and little to fix for me when it goes wrong, although I cannot prove that of every supplier. Where I am genuinely unsure is the middle, positions that matter but have a standby. There I ask the senior maintenance people whether a second brand can go in. 6

04Quotations, urgency and stock

KAKIRA Analyst

How does a normal purchase work?

EXExpert

We collect several quotations, which stay valid for a couple of months, and we order by phone or message. Routine orders can wait; nobody chases them. 16 But when a line is down we want the part now, we will pay for speed, and nobody argues about the invoice later. 16

KAKIRA Analyst

Do you hold stock yourselves, or leave it to the dealer?

EXExpert

For critical positions we hold our own spare, because I would rather own a bearing sitting on a shelf than negotiate lead times in an emergency. Each plant differs, so I will not give you quantities. 1 A dealer who offers to hold stock for me on consignment is interesting, but customers resist paying upfront for services. We want to be billed only when something is used, and the supplier has to show us the service for free before we believe it. 13

KAKIRA Analyst

What about rare or obsolete sizes?

EXExpert

There is always a broker. Brokers fill the gap for rare and obsolete parts, but their reputation is poor, and we associate the one-stop shop with them. 17 If I use one, I want the part inspected before payment and the plant's own engineer to sign it off. A broker is a tool for a bad day, not a supplier. 17

05Fakes and grey stock

KAKIRA Analyst

How big is the problem of fake bearings?

EXExpert

I cannot give you a share, and I do not believe anyone can. What I can give you is what the authorities found in public. In late November 2025 Hanoi market management found 29,886 bearings suspected of counterfeit SKF branding at a trading company; the director said the stock was bought on the domestic market without legal invoices and then offered through a social media page. 10 In May 2026 market management in Hanoi also found 300 more, at a household shop on Hang Chao street. 18

What it means for me is simple. A bearing with no invoice is not cheap, it is unknown. I ask every supplier for the paperwork, because the director in that case said his stock came without legal documents. Then I check packaging and markings on arrival. A fake in a critical position gives you the premium price in your head and the low-cost performance on the shaft. 10

KAKIRA Analyst

Does that change which dealers you trust?

EXExpert

A little, but the brand is what I trust, not the dealer, so I change dealers faster than brands. The dealers who survive with me are the ones who show documents without being asked. For a new supplier it is the easiest way to get through my door. 15

06The market behind the purchase

KAKIRA Analyst

Demand is growing. Does that change how you plan purchases?

EXExpert

Very much. The statistics office has cement production at an estimated 89.5Mt in the first nine months of 2026, up 10%. 11 Cement and clinker consumption was 60.98 million tonnes in the first half, up nearly 16%, although June slipped slightly below May. 19 When plants run this hard, maintenance windows shrink, so we plan stops tightly and want the bearings on the shelf before the stop, not after it. 1

Steel is moving faster. Hoa Phat reports nearly 7 million mt of crude steel in the first half of 2026, up 36%. 20 A producer adding capacity buys a lot of bearings at once, but on a new line the equipment specification decides the brand, so the aftermarket supplier is competing for the replacement later. 4

KAKIRA Analyst

Where do the bearings come from, in your experience?

EXExpert

Mostly imported, through an importer or distributor. One market-research vendor estimates the Vietnamese bearing market at USD 575 million in 2025 and import dependence at 84%. Treat that as the vendor's own estimate, since I cannot verify it. 9 For me the practical point is that delivery and paperwork matter as much as the product, because the brand I choose usually reaches me through a distributor. 15

07Services, outsourcing and relationships

KAKIRA Analyst

Would you outsource bearing maintenance to a supplier?

EXExpert

Not easily. Outsourcing implies job losses and letting outsiders learn the plant, so the maintenance team resists it. Larger groups tend to run their own in-house maintenance companies and outsource only what they cannot do themselves. 21 If a supplier offers condition monitoring or training, I take the free demonstration with pleasure. Whether I pay afterwards depends on what it saved. 13

KAKIRA Analyst

And ordering online? Many suppliers are pushing portals.

EXExpert

Useful for small routine items, if the catalogue is accurate. But human relationships still matter in our buying, and many of us fear that online ordering will cut face-to-face contact with the supplier. 22 When something goes wrong at night I want a person who knows my plant, not a ticket number. 22

08Advice to a newcomer, and what worries me

KAKIRA Analyst

A Japanese or Korean bearing maker wants to win more business in Vietnamese heavy industry. Where should it start?

EXExpert

Do not start with price, and do not start with me. Find the senior maintenance people, because they decide where a second brand may go. 6 Look at the equipment lists, because the manual decides much of the brand, and bring the specification, not a discount. 4

Then show service before you ask for payment. Customers resist paying upfront and want to be billed only for what they use, so demonstrate it free first. 13 And remember that we follow brands, not dealers: protect your name through the dealer chain, with documents, otherwise the fakes protect it for you. 15

KAKIRA Analyst

What would change your mind, and what worries you?

EXExpert

If a low-cost brand showed me a long, documented record in a position I care about, with the same paperwork and the same service, I would move one position to it. A second brand is useful for exactly that reason. I cannot tell you how fast it would happen; it depends on the people. 8

What worries me is the squeeze on steel. The Vietnam Steel Association reports first-half 2026 steel exports of 1.79 million mt, down 4.8%, with US tariffs of up to 50% on certain steel products and the EU carbon border mechanism ahead. 14 When margins tighten, somebody always suggests saving on bearings. I will argue against it, but I cannot promise every plant will. 1

Sources and basis

  1. 1
    Continuous-process plants such as cement and petrochemicals stay loyal to a bearing brand because downtime is costly, while plants that run seasonally shop on price in the off-season
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  2. 2
    Vietnam cement sales hit a record 112Mt in 2025, up 16% year-on-year; domestic consumption was 75Mt, up 13%, and exports nearly 37Mt, up 28%; total sales were 90Mt in 2024; the article calls rising electricity prices a major challenge for producers
    Public source · Global Cement, 5 Jan 2026 · link
  3. 3
    Vietnam Steel Association: 2025 crude steel output was 24.7 million tons, a five-year high and up 12% year-on-year; total steel sales were 24.1 million tons, up 12.9%; exports were 3.15 million tons, up 12.8%; the association expects industry growth of 8-10% in 2026
    Public source · The Investor (Vietnam), 10 Feb 2026 · link
  4. 4
    Brand choice follows the bearing specified in the equipment's manual; users of machinery from a given region tend to prefer bearings from the same region
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  5. 5
    Plants often buy the incumbent brand 'or equivalent', because purchasing staff do not always coordinate with engineers and dare not risk other brands
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  6. 6
    Junior engineers stick to the premium brand out of fear of making a mistake; senior engineers are more brand-flexible
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  7. 7
    Low-cost brands win non-critical, use-and-throw applications; challenger brands position themselves as the alternative when the leader is out of stock or too expensive
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  8. 8
    Customers welcome a second brand mainly to keep the market leader in check in price negotiations
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  9. 9
    Market-research vendor's own estimates in its Vietnam bearings market report (base year 2025, no publication date shown): market value USD 575 million in 2025; import dependence 84% in 2025; China supplied USD 140.9 million of ball bearings to Vietnam in 2024, more than 50% of ball-bearing import value; price competition from Chinese manufacturers is listed as a market challenge; commodity products face narrow margins because distributors absorb freight, inventory financing and VAT
    Public source · Ken Research, Vietnam Bearings Market report, accessed Oct 2026 (base year 2025) · link
  10. 10
    Hanoi market management found 29,886 bearings suspected of carrying counterfeit SKF branding at a trading company, verified on 27 Nov 2025: 62 bearings with listed product codes and 29,824 in storage still being sorted; the company offered them through a social media page; its director said the stock was bought on the domestic market without legal invoices or documents and then offered online
    Public source · Tap chi Cong Thuong (Vietnam Industry and Trade Magazine), 28 Nov 2025 · link
  11. 11
    Vietnam produced an estimated 89.5Mt of cement in the first nine months of 2026, up 10% year-on-year; September 2026 output was 10.4Mt; figures from the National Statistics Office as reported by Global Cement
    Public source · Global Cement, 6 Oct 2026 · link
  12. 12
    Vietnam Steel Association data for the first six months of 2026: crude steel production 15.18 million tons, up 26.9% year-on-year; hot-rolled coil production 5.397 million tons, up 41.9%; finished steel production 18.21 million tons, up 15.1%
    Public source · VnEconomy, 24 Jul 2026 · link
  13. 13
    Customers resist paying upfront for services and want to be billed only when a service is used; value-added services have to be demonstrated free before customers will pay
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  14. 14
    Vietnam Steel Association, first half of 2026: steel exports fell to 1.79 million mt, down 4.8% year on year; the US has imposed tariffs of up to 50% on certain steel products under Section 232; steel is covered by the EU Carbon Border Adjustment Mechanism; the association forecasts 2026 crude steel output of 27 million mt
    Public source · SteelOrbis, 16 Jul 2026 · link
  15. 15
    Customers follow brands, not dealers; loyalty to the distributor is weaker than loyalty to the brand
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  16. 16
    Plants collect several quotations that stay valid for a couple of months and order by phone or message; routine orders can wait, but in an emergency customers demand very fast delivery and will pay for it
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  17. 17
    Brokers fill the gap for rare and obsolete parts but have a poor reputation, and customers associate one-stop shops with them
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  18. 18
    On 28 May 2026 Hanoi market management team No. 1 found 300 bearings showing signs of counterfeit SKF branding at a household shop on Hang Chao street, during checks on a larger seizure of suspected counterfeit goods
    Public source · Tap chi Cong Thuong (Vietnam Industry and Trade Magazine), 30 May 2026 · link
  19. 19
    Cement and clinker consumption in the first half of 2026 was 60.98 million tonnes, up nearly 16% year on year (domestic 41.58 million tonnes, exports 19.4 million tonnes), citing BIDC; production, domestic consumption and exports in June declined slightly from May but stayed above June 2025
    Public source · Vietstock, 4 Aug 2026 · link
  20. 20
    Hoa Phat Group first half of 2026: crude steel output of nearly 7 million mt, up 36% year on year, and hot-rolled coil sales of nearly 3.4 million mt, up 57%
    Public source · SteelOrbis, 9 Jul 2026 · link
  21. 21
    Maintenance outsourcing is resisted because it implies job losses and letting outsiders learn the plant; conglomerates use in-house maintenance subsidiaries and outsource only what they cannot do themselves
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants
  22. 22
    Human relationships matter in buying; customers fear that online ordering will cut face-to-face contact with the supplier
    KIRA field interviews · KIRA field interviews, Southeast Asian heavy-industry plants

Key points

Practitioner views from KIRA Experts transcripts: modelled interviews built on KIRA's field interviews. How we work: Methodology.

More on Bearings in Vietnam