Customer voice · Expert interview

Local or imported testing machines in a Vietnamese steel lab: why service, spares and calibration decide before the brand does

Format
Modelled interview
As of
October 2026
Market
Vietnam
Industry
Test and measurement equipment
Length
≈ 30 min read
Vietnam Steel AssociationVietnam Steel CorporationVietnam Metrology InstituteBureau of Accreditation (BoA)General Department of Customs
Modelled interview. Built from KIRA's face-to-face interviews with materials testing buyers, contract laboratories, equipment suppliers and distributors in other Asian markets, set in today's Vietnamese market. How the trade works comes from what those people told our analysts; every figure comes from a public source dated 2025-2026, marked next to the answer.

Summary

  • A steel producer's lab is a quality-control room: after record volumes of 24.7 million tons of crude steel in 2025, the daily work is basic tensile, bend, hardness and impact testing, bought mostly from local makers because imported machines look too complex and expensive for it. 1 2
  • For these buyers after-sales service and price outrank technical performance, while research buyers put technical fit and repeatability first, which is why the same imported brand sells easily to an institute and hardly at all to a rebar lab. 3 4
  • Service is the real battlefield: calibration once a year, local service contracts that are often cheaper than the maker's, and basic spares that buyers want kept in stock locally. 5 6 7
  • Chinese machines undercut local makers on price but carry a durability and spares doubt, in a year when machinery imports from China rose 35.5% in the first seven months of 2025 and China was again the largest supplier in 2026. 8 9 10
  • Demand is solid: steel sales rose 15.6% to 21.2 million tonnes in the first seven months of 2026, construction steel up 19.6%, and the steel association forecasts 8-10% growth for the year. 11 1
  • Trade defence changes where steel comes from: anti-dumping duties of 23.1% to 27.83% on hot-rolled steel from China have applied since 6 July 2025, and labs that prove local product will keep their value. 12

Transcript

01A quality-control room, not a research lab

KAKIRA Analyst

You run the testing laboratory of a Vietnamese steel producer. What would a foreign machine maker misunderstand first about a lab like yours?

EXExpert

That we are a quality-control room, not a research lab. Steel here is a volume trade. The Vietnam Steel Association says crude steel output reached a five-year high of 24.7 million tons in 2025, up 12%. 1 Every heat and every batch of bar passes through the same few tests: tensile, bend, hardness, impact, plus chemistry. Material makers mostly need those basic tests, and they mostly buy from local manufacturers, because an imported machine looks too complex and too expensive for the job. 2

So when a salesman opens with software, three-axis control and research features, I stop listening politely. For a quality-control buyer service and price come before technical performance. For a research buyer it is the other way round, technical fit and repeatability first. 3 Most foreign makers I meet have the research buyer in their head. 4

KAKIRA Analyst

Who is the research buyer, then?

EXExpert

The institutes and the top universities. They are less price-conscious, they buy advanced, mostly imported brands, and they like a vendor with engineers resident in the country. 4 That is a real market, but it is a small room. Mine is the big room next door, where the machine breaks a bar, the number goes into a certificate and the truck leaves. I should say this is how people like me describe it across Asian steel and materials labs, not only in Vietnam. 2

Our certificate matters because it travels. Material makers have to show test reports to their customers and carry heavy penalties when a batch fails. 13 So I do not buy a machine for its brochure. I buy it so that nobody can question the number. 13

02Local or imported: what actually gets bought

KAKIRA Analyst

When you replace a tensile frame, how do you decide between a local machine and an imported one?

EXExpert

I start from the work, not from the brand. For routine rebar and coil testing a local frame is usually enough, and it is the default for material makers like us. 2 Small processing units go lower still and buy purely on price. 14 I am in the middle: I will pay more than the cheapest, because a machine that stops during the month-end rush costs me more than the difference. 3

Imported frames earn their place in two cases. One is where a customer or an auditor expects a particular brand on the certificate. The other is a test that is not routine and where I need the repeatability. For the daily bar test I cannot defend the premium to my plant manager. 3

KAKIRA Analyst

Do big and small buyers behave differently?

EXExpert

Yes, and it follows the customer pyramid. Premium research labs buy on technology, the middle tier on durability and consistency, the low end on price alone. 15 Independent contract labs are price-sensitive and comfortable with local vendors, while large state-owned labs buy through a two-part tender, technical envelope and commercial envelope. 16

I cannot tell you where exactly the line between middle and low sits in Vietnam, it depends on the customer, and I have not seen anyone else's purchase orders. But if a maker tells me every customer is at the top of the pyramid, I know he has not visited a rebar mill. 15

03Who decides, and how tenders work

KAKIRA Analyst

Who signs off on a new machine in a company like yours?

EXExpert

The lab proposes, purchasing and the plant manager decide, and finance wants to see why this machine and not the cheaper one. I write the justification around uptime and service, not around features, because that is the language they accept. 3 I would not claim every steel company works like this, it depends on the owner, but the lab head who cannot explain the service plan rarely gets the budget. 3

KAKIRA Analyst

And tenders? Do you buy through them?

EXExpert

Private mills mostly compare quotes. State-owned and public laboratories go through a two-part tender, and from what suppliers tell our analysts the winners are not always the best machines. Suppliers that quote casually, or that cannot handle the government paperwork, lose bids they should have won. 17 16

If I were a foreign maker I would put one person in charge of nothing but tender documents. It sounds boring, but it is what separates the vendor in the technical envelope from the vendor who is eliminated before anyone looks at the machine. 17

KAKIRA Analyst

Do you buy direct from the maker or from a distributor?

EXExpert

Where I trust the maker, I prefer to deal with it directly. 18 But in practice the distributor is the one who installs, calibrates and services the machine, and the principal's engineers fly in for the installation and train his people. 19 So my relationship is really with the distributor's engineer, and I judge the brand by him. 19

One thing buyers say across the region: a foreign maker that wants to succeed here needs its own office in the country, not just an agent with a catalogue. 18

04Service, spares and calibration

KAKIRA Analyst

Where does a lab like yours feel the pain with imported machines?

EXExpert

Spares. Imported parts arrive slowly, and a frame that waits for a controller card is a frame that does not issue certificates. Buyers want the vendor to keep basic items such as controller cards in stock locally. 7 The other pain is price: a top-end brand is like a luxury car, and its spares are priced like one. We ask vendors to stop charging far more than the local market for basic parts. 20

A phrase I hear a lot among lab heads, in more than one country: the machines are fine, what we need is service we can afford. 21

KAKIRA Analyst

How do calibration and maintenance work in practice?

EXExpert

My own technicians do the routine work: cleaning, oil, grips, checking the extensometer. About once a year we call the vendor or a calibration body for the external calibration. 5 Calibration is not a formality, because the customer's auditor wants a certificate traceable to a recognised body. The force and hardness laboratory of the national metrology institute is itself listed by the accreditation bureau under the mechanical and calibration fields. 22

KAKIRA Analyst

Do you pay the maker for the annual service contract?

EXExpert

I would rather not. Annual contracts from local service firms are often cheaper than the original maker's. 6 So the question I put to every vendor is simple: if you are not in the country, who comes when the frame stops, and what does he cost? An engineer on the plane from abroad is not an answer for a mill that runs every day. 7

Distributors who understand this call themselves service companies that happen to sell machines. They stock the grips and the cards and they keep their promise on response time. That is how a small brand becomes the one I recommend. 19

05Chinese machines, refurbished frames and the middle path

KAKIRA Analyst

What about Chinese machines? Are they eating the market?

EXExpert

They undercut even the local makers, and for a low-end buyer price alone decides. But there is a doubt about durability and about spares, and they mostly sell through large distributors. 8 In the country as a whole the flow is huge: machinery, equipment, tools and spare parts imported from China were worth $21.3 billion in the first seven months of 2025, up 35.5%. 9

In 2026 China is again the largest supplier of machinery and equipment, with nearly US$9.72 billion in the 2026 customs data, up 25%, and Customs attributes the growth to new investment projects and production expansion. 10 That tells me new plants are being fitted out, and plants being fitted out need testing machines too. Whether those machines are Chinese, I cannot say from Customs numbers. 10

KAKIRA Analyst

Would you buy a refurbished machine?

EXExpert

Rarely. New local machines are cheap enough that refurbished frames are not attractive to material buyers like us. 23 A refurbished demo unit makes sense for a supplier who wants to convince a customer to upgrade later, not for me who needs a certificate next week. 23

KAKIRA Analyst

So where does the imported brand still win?

EXExpert

Where the buyer sits at the top of the pyramid, or in the middle tier where durability and consistency matter more than the first price. 15 A mid-range imported frame with a good local service partner can beat a cheap machine over a long period, because the lab that has a failure during an audit pays far more than the price difference. 3

06The 2026 market around the lab

KAKIRA Analyst

How is business at your mill this year, and does it change your testing needs?

EXExpert

Demand is good. In the first seven months of 2026 steel sales rose 15.6% to 21.2 million tonnes, construction steel stayed the largest segment and grew 19.6%. 11 The steel association expects 8-10% growth for the year, and about 26 million tons of domestic consumption. 1 When the order book is full, the test frame runs on two shifts and the first thing that suffers is maintenance. 5

A senior steel group manager forecast that construction steel demand will keep growing at 5-7% a year, helped by big projects such as the high-speed railway. 24 For a lab that means more batches, more certificates and more pressure on uptime, so the buyer for a new machine starts to value service even more. 3

KAKIRA Analyst

Trade defence has been in the news. Does it touch your lab?

EXExpert

Indirectly. Anti-dumping duties on hot-rolled steel from China, between 23.1% and 27.83%, have been in force since 6 July 2025, and before that the country imported nearly 8.8 million tons of hot-rolled steel in nine months of 2024, 72% of it from China. 12 Domestic mills that sell more locally need to prove quality more often to their customers, and that is a job for the lab. 13

I would not read that as a promise of an equipment boom, because I do not know how any one mill will invest. It is a reason for labs to take the quality certificate more seriously, and that tends to be where the budget for a better machine appears. 13

07Advice to a newcomer, and what worries me

KAKIRA Analyst

A Japanese or Korean maker of testing machines wants to sell to steel and construction materials labs in Vietnam. What should it do?

EXExpert

Offer a basic, rugged tensile and bend frame at a price that a quality-control buyer can defend, and put your money into the service around it. 2 Keep basic spares in the country, and put an engineer in the country, because buyers prefer a vendor with a local presence. 7 4

Do not lead with research features. Lead with uptime, calibration support and a service price that beats the maker's contracts of other brands, because local service firms already undercut them. 6 And learn the tender paperwork, because the state buyers will not forgive casual quotes. 17

KAKIRA Analyst

What would change your mind about local machines, and what worries you?

EXExpert

If a foreign brand showed me a rugged basic frame, spares on the shelf and a service fee that stands next to the local one, I would put it on the shortlist for the next purchase. 7 6 A machine is the easy part. What I would need is a distributor who has done it for others and answers the phone. 19

What worries me is two things. One is that price alone drives the low end, so a mill can buy a machine that looks fine and then discovers the spares problem in the busiest month. 8 The other is that a mill running flat out will skip calibration to save a day. The national metrology institute's laboratory holds accreditation in calibration and mechanical, so the capacity exists, but only if we use it. 22 5

Sources and basis

  1. 1
    Vietnam Steel Association: Vietnam's 2025 crude steel output reached a five-year high of 24.7 million tons, up 12% year on year; total steel sales in 2025 were 24.1 million tons, up 12.9%, with exports of 3.15 million tons, up 12.8%; for 2026 the association forecasts growth of 8-10%, finished steel output of about 33-34.5 million tons and domestic consumption of around 26 million tons
    Public source · The Investor (Vietnam), 10 Feb 2026, citing the Vietnam Steel Association · link
  2. 2
    Material makers mostly need basic tensile, hardness and impact tests and buy from local manufacturers; imported machines are seen as too complex and expensive for that work
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  3. 3
    For quality-control buyers after-sales service and price outrank technical performance; for research buyers technical fit and repeatability come first
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  4. 4
    Top research institutes are not very price-conscious and buy technologically advanced, mostly imported brands; they prefer vendors with engineers resident in the country
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  5. 5
    Labs do their own routine maintenance and call the vendor about once a year for external calibration
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  6. 6
    Annual maintenance contracts from local service firms are often cheaper than the original maker's
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  7. 7
    Imported spares arrive slowly; buyers want vendors to keep basic items such as controller cards in stock locally
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  8. 8
    Chinese machines undercut even local makers but suffer from a poor durability perception and weak spare availability, and they sell mainly through large distributors
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  9. 9
    Vietnam's imports from China reached $101.4 billion in the first seven months of 2025, up 27%; machinery, equipment, tools and spare parts from China were worth $21.3 billion, up 35.5%, well above the national average for the same goods (preliminary General Department of Customs data)
    Public source · Vietnamnet Global, 25 Aug 2025 · link
  10. 10
    Preliminary Vietnam Customs data: imports of machinery and equipment reached US$18.56 billion as of 15 April 2026; in the first quarter of 2026 nearly US$15.5 billion, up 22.7% year on year; China was the largest supplier, with shipments of nearly US$9.72 billion, up 25% year on year (the page does not state the period of this figure); the growth is attributed to new investment projects and production expansion
    Public source · ITPC Ho Chi Minh City, citing VOV, data to 15 Apr 2026, viewed Oct 2026 · link
  11. 11
    In the first seven months of 2026 Vietnam's steel sales increased 15.6% to 21.2 million tonnes; construction steel remained the industry's largest segment, up 19.6%; hot-rolled coil sales surged 44.3% and total steel export volume declined slightly by 1.4%; accelerating public investment and recovering construction activity are expected to support demand in the final months of the year
    Public source · Viet Nam News, 3 Sep 2026 · link
  12. 12
    Vietnam imposed anti-dumping duties of up to 27.83% on hot-rolled steel from China, reported by Reuters: 27.83% for Baoshan and Maanshan and 23.1% for Guangxi Liuzhou (up from 19.38% in March), in force from 6 July 2025 for five years; Vietnam imported nearly 8.8 million tons of hot-rolled steel in January-September of the previous year (2024 by the article date), 72% of it from China
    Public source · Tuoi Tre News, citing Reuters, 8 Jul 2025 · link
  13. 13
    Component and material makers must show test reports to their customers and face heavy penalties for failures
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  14. 14
    Small forging and processing units buy low-end equipment purely on price
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  15. 15
    Customers form a pyramid: premium research labs buy on technology, the middle tier on durability and consistency, the low end on price alone
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  16. 16
    Independent contract labs are price-sensitive and comfortable with local vendors; large state-owned labs buy by two-part technical and commercial tender
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  17. 17
    Suppliers that quote casually or struggle with government paperwork lose public tenders
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  18. 18
    Buyers who trust the maker prefer to buy direct from it rather than through a distributor, and a foreign maker that wants to succeed must have its own office in the country
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  19. 19
    Distributors of imported systems install, calibrate and service the machines, and the principal's engineers fly in for installation and train the distributor's engineers
    KIRA field interviews · KIRA field interviews, Asian testing-equipment distributors
  20. 20
    A top-end brand is like a luxury car, and its spares are priced like it too; buyers ask vendors to stop charging far more than the local market for basic spares
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  21. 21
    Buyers say the machines are fine; what they need is service they can afford
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  22. 22
    The force and hardness laboratory of the Vietnam Metrology Institute is listed by the Bureau of Accreditation as accredited under VILAS 072 in the fields of Measurement - Calibration and Mechanical, with an effective date of 19/06/2030
    Public source · Bureau of Accreditation (BoA), laboratory directory page, viewed Oct 2026 · link
  23. 23
    Material buyers rarely take refurbished machines because new local machines are cheap enough
    KIRA field interviews · KIRA field interviews, Asian materials testing buyers
  24. 24
    Deputy general director of Vietnam Steel Corporation: construction steel demand is expected to grow steadily at 5-7% annually, with high-speed rail mentioned among the projects
    Public source · Vietstock, 27 May 2025, credited to VIR · link

Key points

Practitioner views from KIRA Experts transcripts: modelled interviews built on KIRA's field interviews. How we work: Methodology.

More on Materials testing equipment in Vietnam